Flour milling production line J type flour milling machine

Diamond Tsunami Model Flour Machine The product specification 800, 1000, 1250 applied in built the flour factory project of dai

 Flour mill

The product specification 800, 1000, 1250 applied in built the flour factory project of daily output more than 200 tons

1. This machine could be collocated computer automatic control. It could solely control the complete machine and centralized automatic control by long-distance as well, which could be long-distance diagnosed and repaired by connect to LAN or Internet;

2. The feeding control system could use pneumatic-control feeding or computer-control frequency conversion feeding;

3. Grinder roll independently supported by clutch structure of eccentric levers, grinder roll independently bear working stress;

4. lie the grinder roll make the material easy entered rubbing area; convenient dismounting and maintain.

5. Grinder roll bearing use the self-aligning roller bearing, ensure coaxial precise turning and could bearing high rev and grinder roll operating stress;

6. Adopt high quality, high alloy and high wearable composite centrifugal grinder roll, steady running and long useful life;

7. High precision rigidity strainer, the useful life of tooth wedge belt;

8. Speed roller adopt three wheel speed framework of tooth wedge belt, big transfer power, not skip tooth, not off tracking, steady running and low noise; there are negative pressure gas suction device of double intakes inside mill chamber, its not only optimize feeding state, but also improve the thermal discharge of grinder roll and material;

9. The scraper cleans up roller more completely, long useful life and easy to maintain;

10. the key parts all use the international advanced product;

11. The complete machine is fully-enclosed double structure, the surface use the high pressure static spray plastic.

12. The global initial computer automatic test and display, digitally adjust roller space, peerless!

13. The grinder roller of core grinding use global initial laser frost technology, whose useful life is two times than sand spray grinder roll.

14. Its mainly used in the huge flour project of daily output more than 200 tons, it also used in the crash and rubbing of other materials.

 Main technical parameters

Main specifications and technical parameters Table 

Project		Units	Specifications
Model			T ·125/25	T·100/25	T·80/25	T·60/25
Roller (diameter * length		mm	Φ250*1250	Φ250*1000	Φ250*800	Φ250*600
Roller use of range		mm	Φ250-Φ230
Roll fast speed		r/min	450-600
Speed roller speed ratio			1.25/1   1.5/1    2/1     2.5/1
Feeding roller speed ratio			2/1   1.4/1   1/1
Equipped with power		kw	30-5.5
Main Drive round	Diameter	mm	Φ345
	Groove few trough		15N(5V)  4V,5V,6V
Gas pressure		Pa	6*105
Dimensions (L * W * H)		mm	2072*1490 *1895	1822*1490 *1895	1622*1490 *1895	1422*1490 *1895
Weight (approximately)		kg	4100	3300	3000	2700

Flour milling production line J type flour milling machine