Pneumatic flour mill H type milling machine

Product Specification 500,600,800 applied in the built of flour factory projectpf daily output less than 200 tons. 1. Applications and features

Flour Milling Machine is the main mill grinding equipment. Wheat-based processing, and other miscellaneous grains Merchantable, It depends mainly on one pair of differential rotation in both directions Roller ripping wheat, Oatmeal from the endosperm of wheat will be on stripping, and milling into flour. Work materials are broken, cut, stripping, scraping, grinding to achieve a certain effect, each of flour, there are two independent drive, feed, grinding system, in the powder road to skin, heart, slag, Mei all the technical parameters of different systems to play their respective functions.

2. Main Features:

Adopting a full pressure control, stand-alone control, even remote centralized control; and adopting automatic control computer can be used,

Feeding frequency, When engine off can realize the fast dump and the feeding roller rotational speed parameter pre-set tuning.

The roll uses the eccentric release lever meeting and parting structure independent supporting on the gray iron rack, roll group self-supporting working stress

The roll sets evenly, the material easy to enter the attrition area, the knocked-down and assemble service is convenient

The quick slow roll uses three round constant speed tooth wedge belt transmission, the transmission power is big, does not jump the tooth, does not run, the revolution is steady, the noise is low.

Rack of flour on both sides of the upper and lower mesh structure, speed roller bearings at the next rack connection with the vibration pad.

Heart wind mill with suction devices, the situation can be improved feed, and materials to reduce the temperature Roller.

Pneumatic components, the bearings are used imported products, tooth wedge with a move to ensure that the computer's performance.

Complete machine for the whole closed duplex structure, surface used electrostatic spraying production process. Bright color, for a long time not changing color.

3. Main technical parameters

Main specifications and technical parameters Table

Project		Units	Specifications
Model			T ·125/25	T·100/25	T·80/25	T·60/25
Roller (diameter * length		mm	Φ250*1250	Φ250*1000	Φ250*800	Φ250*600
Roller use of range		mm	Φ250-Φ230
Roll fast speed		r/min	450-600
Speed roller speed ratio			1.25/1   1.5/1    2/1     2.5/1
Feeding roller speed ratio			2/1   1.4/1   1/1
Equipped with power		kw	30-5.5
Main Drive round	Diameter	mm	Φ345
	Groove few trough		15N(5V)  4V,5V,6V
Gas pressure		Pa	6*105
Dimensions (L * W * H)		mm	2072*1490 *1895	1822*1490 *1895	1622*1490 *1895	1422*1490 *1895
Weight (approximately)		kg	4100	3300	3000	2700

Pneumatic flour mill H type milling machine